Exclusive UK & Eire Distributor

Anti-Slip Coatings

EPO TUFF AU-73 ANTI-SLIP Aliphatic Urethane
High 73% solids with outstanding flow and blending characteristics.
Its high solid content produces dry film thickness twice conventional polyurethanes and gives far more coverage.
AU-73’s special resin maintains gloss year after year and delivers durability and protection in tough industrial applications – absorbing 4 times as much direct impact as conventional polyurethanes and up to 10 times more reverse impact.
Available in a wide range of colours and ‘CRYSTAL’ CLEAR with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete, wood, glass etc AU-73 has excellent U.V. chemical and environmental resistance. Low VOC. Excellent levelling properties and dries to a superb gloss.
Coverage is approximately 21.5 square metres per US gallon at 125 microns. Available in 1 US gallon packs. Back to top

EPO TUFF ES-83 ANTI-SLIP Two Part Epoxy
ES-83 is a high 83% solids, high build, slip resistant epoxy protective coating for tough industrial, marine and off shore environments.
This product is designed to solve complex slip injury problems with minimal surface preparation.
ES-83 bonds to tightly adhering rust and intact old paint, new and unpainted surfaces without blast cleaning with excellent resistance to weather, moisture, sunlight and chemical fumes.
Touch-dry in as few as two hours at 21°c with recoat in three hours, and with low temperature application and cure down to 4°c. Can be over-coated with a wide range of products including AU-73 to provide a superior system.
Available in a wide range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete, wood, glass etc ES-83 has excellent U.V. chemical and environmental resistance. Low VOC. Excellent levelling properties.
Coverage is approximately 24.5 square metres per US gallon at 125 microns and can be applied at up to 200 microns. Available in 1 US gallon packs. Back to top

AQUA TUFF ANTI-SLIP Two Part Epoxy
A two part epoxy coating formulated to provide a tough protective coating against chemical penetration including brake fluid, Skydrol, petrol, solvents etc making it ideal for automotive service bays and aviation applications.
AQUA TUFF penetrates damp, dry and green concrete sealing impossible greases and is ideal as a primer prior to application of 100% solid epoxy coatings.
Recoat in three to four hours. Available in a range of colours with a wide range of Traction Granules to offer excellent anti-slip characteristics.
A two part system for interior and exterior use on steel, concrete AQUA TUFF has excellent U.V. chemical and environmental resistance. Excellent levelling properties.
Coverage is approximately 20.5 square metres per US gallon. Available in 1 and 5 US gallon packs. Back to top

VULCAN UV ANTI-SLIP Acrylate Rubber Resin
Slip Resistant Floor Coating with traction grit for interior and exterior use on wood, steel, concrete and any surface that requires safe footing.
This One Part system protects concrete against de-icing damage, oil and grease and offers good resistance to acids, alkalis, glycol and phosphates. VULCAN produces a seal that retards moisture in new concrete for full curing. Traction grit is available in separate pre measured packs in Fine, Medium or Coarse.
Coverage is approximately 33 square metres per US gallon. Back to top

EPOXY Slip Resistant Textured Aerosol Spray
A slip resistant epoxy spray that cures to a hard textured finish. Adheres to fibreglass, wood, steel, concrete.
Effective on steps, ramps, baths, ladders, stair treads, machinery, etc. Quick drying. Available in the following colours: clear, white, grey, black and yellow. 2.5 square metres /12 oz can.
Back to top

Back to top

Back to top

Questions? or To Place An Order, Call: +44 (0) 1824 702550